How to Use the Geek Bar Pulse: Instruction Manual

In the span of less than a year, the Geek Bar Pulse has become the most popular disposable vape in the world. That’s because it was released at the right time with the right combination of features along with a fun and catchy design that really resonated with consumers. Until something even more revolutionary comes along, it looks like the Geek Bar Pulse is going to have no trouble retaining its leadership position for quite some time. So, if you’ve just purchased your first vape – and it happens to be a Geek Bar Pulse – you’re not the first person in that situation and certainly won’t be the last.

One thing about the Geek Bar Pulse, though, is that it’s a little more complicated than the disposable vapes that were popular a few years ago. Using it might not be entirely self-explanatory if you’re new to vaping, and you may need a little help when it comes to getting started. Learning how to use the Geek Bar Pulse is also made a bit more difficult by the fact that the device doesn’t include a traditional manual – but we’re going to fix that in this guide.

In this Geek Bar Pulse instruction manual, we’re going to walk you through using the world’s most popular vape from the very beginning – from unboxing the device to troubleshooting the problems that might occur while you use it. When you’re done reading, you’ll be a confirmed master.

First, though, let’s suppose that you haven’t actually bought your first device yet. Why is the Geek Bar Pulse such a popular vape, and why might it be a good choice for you?

Why Is the Geek Bar Pulse So Popular?

Only a small handful of disposable vapes have ever legitimately been the most popular vape on the market, and the Geek Bar Pulse definitely has that crown as 2024 draws to a close. There are many dozens of disposable vapes on the market today, though, at the very least. What makes the Geek Bar Pulse so popular? We think that it comes down to a combination of factors.

• The selection of Geek Bar flavors is absolutely enormous, and no Geek Bar device has a bigger flavor selection than the Geek Bar Pulse. There are dozens of flavors available for this device at the time of writing, and the selection is still growing.
• The Geek Bar Pulse was the first disposable vape to offer two selectable modes and a digital display. Although other devices have since copied that combination of features, the Geek Bar Pulse reached the market first.
• The Geek Bar Pulse looks great. People like the design of the device, and it has what many people feel is just the right size to offer plenty of puffs without feeling overly large or heavy.

Today’s disposable vapes have become so advanced that it’s hard to make an incorrect choice with the current crop of devices. The Geek Bar Pulse, however, is definitely more correct than most.

Now, let’s learn how to use it.

How to Unbox the Geek Bar Pulse

Before you can begin using the Geek Bar Pulse, you need to unbox it correctly and turn it on. Here’s how to do it.

• Tear the box open at the perforation and remove the inner pouch holding the Geek Bar Pulse.
• Remove the device from the pouch.
• Remove the silicone plug from the Geek Bar Pulse’s mouthpiece and discard it.
• Move the switch on the bottom of the device to the middle position. This turns the Geek Bar Pulse on and configures it to use the standard single-coil vaping mode. You can turn the device off whenever you like by moving the switch back to the “Close” position.

How to Use the Geek Bar Pulse

To use the Geek Bar Pulse, just puff gently on the mouthpiece in the same way that you’d smoke a cigarette. When the screen turns on, you’re using the correct amount of air pressure. If you hear a gurgling sound when you vape, you’re probably puffing too firmly.

How to Use Pulse Mode

To use the Geek Bar Pulse’s pulse mode, move the switch on the bottom of the device to the “Pulse” position. In this mode, the Geek Bar Pulse uses both of its coils simultaneously rather than just one at a time. Pulse mode makes the device produce twice as much vapor – but it also doubles the e-liquid consumption, cutting the total puff count in half. Some people use Pulse Mode on a full-time basis and simply put up with the reduced total puff capacity, and others use it only when they need a bit of an extra pick-me-up.

To return the Geek Bar Pulse to the standard single-coil mode, move the switch back to the middle position.

How to Recharge the Geek Bar Pulse

When the battery meter on the Geek Bar Pulse’s screen reaches the bottom, the battery is dead. When this happens, the device will stop working. Recharge the device by using a USB cable to connect it to your computer. When the meter is full, the battery is charged.

How to Fix Problems with the Geek Bar Pulse

Is your Geek Bar Pulse not quite working the way you expect? You’ll find the help you need in this section of our instruction manual. Here’s what you should do if your Geek Bar Pulse has a problem.

• Not Hitting:
  • Make sure that the switch isn’t in the “Close” position. In that position, the device is turned off.
  • Charge the battery.
• Not Charging:
  • Connect the Geek Bar Pulse to a different USB port.
  • Use a different USB cable to charge the device.
  • Make sure that the Geek Bar Pulse’s charging port is clean.
• Tastes Burnt:
  • Wait a little longer between puffs, especially if you’re using the dual-coil pulse mode.
  • Replace the Geek Bar Pulse if it’s out of e-liquid. We’ll discuss this in greater detail below.

How to Know when the Geek Bar Pulse Is Finished

When your Geek Bar Pulse is out of e-liquid, that means it’s time to recycle the device and replace it with a new one. You can tell that your device is dry because you’ll start to get a harsh burnt flavor every time you puff on it.

Note that this may not happen at exactly the time that the e-liquid meter runs out because what’s shown on the meter is just an approximation. When the meter reaches the bottom, you may still get some more puffs out of it but will definitely need to replace it soon.